Pressure brake bending is a common metalworking technique used to bend sheet metal into a desired shape. It is vital in the metalworking industry and manufacturing industry. During the bending process, the metal plate is placed on a pressure brake and by applying pressure it can be bent into the desired angle and shape. Pressure brakes usually consist of an upper punch and a lower die. The upper punch bends the metal plate by applying downward pressure. This technology is widely used in the production of various products such as auto parts, home appliances, building materials, etc. Not only do these machines improve product quality and consistency, they can also dramatically increase production efficiency by slightly adjusting precision. Compared with traditional manual bending, pressure bending machines have higher production efficiency and precision. Therefore, it is receiving more and more attention and is widely used in various small-scale to large-scale production projects. Understanding pressure braking technology is critical to designing and producing sustainable smart products.

Bending machine category

The hydraulic bending machine includes a bracket, a workbench and a clamping plate. The workbench is placed on the bracket. The workbench is composed of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base is composed of a seat shell, a coil and a cover plate. The coil It is placed in the depression of the seat shell, and the top of the depression is covered with a cover plate. When in use, the coil is energized by the wire, and the energization generates gravitational force on the pressure plate, thereby realizing the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into a variety of workpiece requirements, and workpieces with side walls can be processed.

BAICHUAN Technical Data

name of parameter	parameter	unit
nominal pressure	1100\13001700\2200\2500\3000\4000\5000\6000\8000\10000	KN
Table length	3200\4100\6000\7000\8000	mm
Depth of throat	300-600	mm
Height of workbench from ground	900-2200	mm

Structural features

(1) Hydraulic upper transmission. The oil cylinders at both ends of the machine tool are placed on the slide blocks to directly drive the sliding work.

(2) It adopts mechanical stop structure, which is stable and reliable.

(3) The slider stroke can be quickly adjusted mechanically, finely adjusted manually, and counter displayed.

(4) It adopts all-steel welded structure and has sufficient strength and rigidity.

(5) The slide synchronization mechanism adopts torsion shaft forced synchronization.

(6) Inclined wedge-type deflection compensation mechanism to ensure higher bending accuracy.