Simply put, a CNC laser cutting machine uses high-intensity light to vaporize material from a workpiece with ultrafine precision. The position of the laser head is controlled by the computer to cut shapes out of sheets of material. Laser cutters can also cut slots and bore holes through material with high precision to meet design requirements. However, do you know how to maintain your CO2 Laser Cutting Machine? Today we will talk about this problem.

Get Free Quote

Here’s what I learned:

Clean the Optics Regularly: The lenses and mirrors should never have dirt on them. This is harmful because dirt will reflect parts of the laser instead of the whole beam, thus diminishing the power and accuracy of the beam. For Mavericks, anti-fog lens cleaner and lens cleaning cloths are recommended to prevent scratches.

The Cooling System should be Cooled: The chiller unit must perform effectively to the maximum temperature level. Websites recommend that the cooling water temperature not exceed 20-22 degrees Celsius and that the chiller has sufficient air circulation.

Check Laser Tube Operating Life: Depending on the operational procedure, the general lifespan for CO2 laser tubes ranges from 1500 to 2000 hours. I record the number of usages to make replacement plans in advance.

Examine and Service Moving Parts: The friction of the rails, bearings, and other components increases precision, as movement parts require lubrication to be at their most precise. It is common for the manufacturer to give the appropriate type of lubricant to use.

Electrical and ground checking: A perfunctory performance in electric connections causes erratic outputs. I frequently check the wires for electrical faults and ensure the machine is correctly earthened to avoid electrical accidents.

These practices will have effectively ensured the durable and effective use of your CO2 laser cutter.