As the development of industry, the plastic crusher machine is more and more popular. However, do you know how to prolong the service life of plastic crusher machine. Today we will talk about this topic.

Get Free Quote

The maintenance and care of plastic crusher mainly includes the following aspects:

Regular cleaning: Regularly clean the plastic fragments, dust and dirt inside and outside the crusher, especially the knives and screens, to ensure that the machine is kept clean.

Knife maintenance: Regularly check and adjust the gap of the knives to ensure that the knives are sharp and tight. If the knives are found to be broken, they should be replaced in time.

Lubrication maintenance: According to the manufacturer's recommendations, regularly lubricate and maintain the bearings, chains, gears and other components of the crusher to ensure their normal operation.

Electrical equipment inspection: Regularly check whether the electrical equipment is firmly connected, whether the cables are damaged, and whether the electrical components are operating normally to ensure the safety and stability of the electrical system.

Maintain good grounding: The machine should be well grounded to ensure safe operation.

Clear the starting resistance: Before the second start, the remaining debris in the machine room should be cleared to reduce the starting resistance.

‌Ventilation and heat dissipation‌: The plastic crusher should be placed in a ventilated position to ensure that the heat from the motor is dissipated and its life is extended‌.

‌Replace the tool regularly‌: Under normal use, the tool should be replaced regularly to ensure the fixity between the tool and the tool holder‌.

‌Adjust the tool gap‌: When replacing the tool, the gap between the moving knife and the fixed knife should be adjusted according to the power of the crusher. The gap of the crusher above 20HP is 0.8MM, and the gap of the crusher below 20HP is 0.5MM. The thinner the recycled material, the larger the gap can be appropriately‌.

‌Check the belt‌: Check the plastic crusher belt regularly to see if it is loose and tighten it in time‌.

Through the above maintenance and care measures, the service life and performance of the plastic crusher can be effectively improved.